Model NO.: HN-S617
Screwdriver Startup Mode: Hand press
Orbit Diameter: 5mm
Free Speed: 13000r.p.m
Sanding Discs: 5" 6"
Air Consumption: 480L/Min
Air Inlet: 1/4"
Air Hose: 3/8"
Air Pressure: 90psi 6.3bar
Transport Package: Carton
Specification: 5" Pad, Self-Vacuum
HS Code: 84671100Name:Â 5" Self-Vacuum Orbital Air Sander
Model No.: HN-S617
High quality materials, TPI bearing for longer life
Self-Vacuum can keep the surface clean;
Applicable for polishing the surface of metal, furniture, alloy, glass fiber reinforced plastics(fiberglass), laptop, cell phone, automobile, plane, plastic, steamer etc;
Stable, smooth, durable and environmental;
Orbit 5mm fit for medium polishing based on after rough polishing;
|Model No.||Free Speed||Orbit Diameter||Air Consumption||Air Pressure||Self-Vacuum||Â Air Inlet||Air Hose|
|HN-S617||13000r.p.m||Â Â 5mmÂ||Â 480L/min||90psi 6.3bar||Â Â Yes||Â 1/4"||Â 3/8"|
Air Supply & Pressure
â€¢ Always use a clean and dry air supply to operate the tool at 90 PSIG-6.2 bar.
â€¢ To ensure operating safety, performance and prevent damage to the tool do not operate exceed the maximum working air pressure.
â€¢ Use a fitting air hose for connection between the compressor & tools.
â€¢ Ensure that the compressed air is cooled and its water content filtered and lubricated as required as shown in Fig 1 below.
â€¢ Excessive moisture levels can be compressed in the pipe and can permeate into tools & equipment resulting in mechanical failures and possible
â€¢ Ensure all hoses and fittings are clean and free of dust and debris before connecting any tools and equipment.
â€¢ Dust and debris can cause rust and malfunction in the tools and can result in dangerous operation.
1.Q: Can you send us samples
A: We are pleased to send you the sample to test the quality and market.
2.Q: About your products, could you do it OEM?
Â A: Yes, OEM is workable for us, but with MOQ.
Â Â Â Â Pls let us know your demand.
3.Q: Have you guarantee for your products?
Â A: Normally we provide half year guarantee with spare parts supply.
4.Q: Do you also provide spare parts of pneumatic tools?Â
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some vulnerable parts.
5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized but with MOQ.
6.Q: Can you inform us about the inner box?
A: We have 2 choices for inner box: ?neutral box(white-box & neutral color box) and customized color box with MOQ.
7.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.
8.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.
9.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
10.Q: How does your factory do regarding quality control?
A: HUNEER People always pay great attention to quality control from the very beginning, and every product was tested piece by piece before delivery.
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.huaxinbrush.com