KN 4010 Hot Melt Adhesive Rubber Process Oil

Model NO.: HRPC-KN 4010
Bitumen Type: Naphthenic
Technique Data: Density
Appearance: Crystal Clear
Purity: 99.9%
Storage: Store at Room Temperature
Sample: Available
Physical State: Liquid
Other Names: Paraffin Oil
Trademark: HRPC
Transport Package: by Drum, Tank
Specification: Naphthenic Oil
Origin: Sinkiang Karamay
HS Code: 3812200000
Model NO.: HRPC-KN 4010
Bitumen Type: Naphthenic
Technique Data: Density
Appearance: Crystal Clear
Purity: 99.9%
Storage: Store at Room Temperature
Sample: Available
Physical State: Liquid
Other Names: Paraffin Oil
Trademark: HRPC
Transport Package: by Drum, Tank
Specification: Naphthenic Oil
Origin: Sinkiang Karamay
HS Code: 3812200000
KN 4010 Hot Melt Adhesive Rubber Process Oil   

1. Specification
 Items: KN 4010
Analysis Items KN4010 Test Methods
Appearance Crystal Clear Visual Test
Seibert Color ≮+24 GB/T3555
Kinematic Viscosity
(40ºC),mm2/s
Report GB/T 265
Kinematic Viscosity
(100ºC),mm2/s
9.0~11.0 GB/T 265
Density (20ºC),kg/m3 Report GB/T 1884
Flash Point,(Opening),ºC     ≮210 GB/T 3536
Pour Point,ºC ≯-15 GB/T 3535
Carbon Type Analysis  % CA ≯2 SH/T 0725
CN ≮40
CP Report
       
The above technical parameters only represent the typical data of standardized brand products, and the
specific products shall be subject to the actual contract provisions


2. Product Feature  
 
 Low pour point and excellent low temperature fluidity, free of any coagulant
 
 Low aromatic residual, high naphthenic content and good solubility
 
 Stable carbon skeleton, reasonable hydrocarbon composition
 
 The product is highly refined and keeps good solubility with rubber

3. Application Industry
 KN 4010 Hot Melt Adhesive Rubber Process Oil
4. Packing &Shipping 
KN 4010 Hot Melt Adhesive Rubber Process Oil
5. Contact Us
KN 4010 Hot Melt Adhesive Rubber Process Oil
  KN 4010 Hot Melt Adhesive Rubber Process Oil   

1. Specification
 Items: KN 4010
Analysis Items KN4010 Test Methods
Appearance Crystal Clear Visual Test
Seibert Color ≮+24 GB/T3555
Kinematic Viscosity
(40ºC),mm2/s
Report GB/T 265
Kinematic Viscosity
(100ºC),mm2/s
9.0~11.0 GB/T 265
Density (20ºC),kg/m3 Report GB/T 1884
Flash Point,(Opening),ºC     ≮210 GB/T 3536
Pour Point,ºC ≯-15 GB/T 3535
Carbon Type Analysis  % CA ≯2 SH/T 0725
CN ≮40
CP Report
       
The above technical parameters only represent the typical data of standardized brand products, and the
specific products shall be subject to the actual contract provisions


2. Product Feature  
 
 Low pour point and excellent low temperature fluidity, free of any coagulant
 
 Low aromatic residual, high naphthenic content and good solubility
 
 Stable carbon skeleton, reasonable hydrocarbon composition
 
 The product is highly refined and keeps good solubility with rubber

3. Application Industry
 KN 4010 Hot Melt Adhesive Rubber Process Oil
4. Packing &Shipping 
KN 4010 Hot Melt Adhesive Rubber Process Oil
5. Contact Us
KN 4010 Hot Melt Adhesive Rubber Process Oil
 

Traditional SPC Flooring

Traditional SPC Flooring basically is the environmental protection flooring that composes by calcium powder and food grade PVC.The SPC flooring has been tested in many ways and reached the standard of American/European standard, with thefeatures of no benzene, mildew-proof, moisture-proof, fireprevention, insect prevention and simple installation. On the basis of the common flooring, the new SPC flooring is more scratch resistant, and its antifouling performance is also significantly improved. At the same time, SPC board is not afraid of liquid soaking, mildew, moisture and water absorption. In the fire rating also reached B1. After lighting the cigarette on the flooring for three minutes, there is no damage to the coating of the flooring.


Indoor Spc Flooring,Wood Spc Flooring,Traditional Spc Flooring,Spc Waterproof Flooring

Dalian Jiamei New Material Co., Ltd. , https://www.maijinfloor.com