Nine major considerations for bathroom decoration

Home improvement industry insiders pointed out that the details involved in the decoration of the bathroom in the home decoration are quite a lot. If not handled well, it will not only directly affect the quality of home life in the future, but also affect the mood. Pay attention to the following points when decorating the bathroom:

First, the ceiling design

The water vapor in the bathroom is heavier, so it is important to choose materials that are waterproof, anti-corrosive and rust-proof.

Second, the ground points

Before the floor tiles are paved, be sure to waterproof them. After the tiles are laid, ensure that the brick surface has a water discharge slope (usually about 1%), and the slope is facing the floor drain. The ground must be closed after the tiles are laid. At least 24 hours must be guaranteed; when laying the floor tiles, pay attention to the seams and alignment with the wall tiles to ensure the overall sense of the whole bathroom, so as not to create a visually confusing impression.

Third, the wall considerations

The wall tiles in the bathroom should be protected from moisture and water, and the tiles should be flat when they are tiled. They should be seamed and aligned with the floor tiles to ensure the overall feeling of the wall and the ground; To be small and appropriate, it is convenient to cover the incision with the flange cover on the water supply device, so that the appearance is perfect and natural.

Fourth, the door and window should pay attention to

It is best to have windows in the bathroom for ventilation. If there are no windows to prevent ventilation, pay special attention to the details of the door. In order to prevent the water from overflowing in the bathroom, the door boundary should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept larger to facilitate the return air; if it is a sliding door, it must be in the sliding door. Make a layer of waterproof between the bathroom tiles to prevent water seepage.

Fifth, pay attention to the laying of circuits

The wire joints in the bathroom must be hung with tin, and should be wrapped with waterproof tape and insulating tape to ensure safety; the wire body must be covered with flame retardant pipe; all switches and sockets must have moisture-proof boxes, and the location must also be based on electrical appliances. Size and location depend on the convenience of use, so as to reduce the trouble.

Sixth, strict waterproof road reconstruction

It is best not to make too much changes in the water supply and drainage lines of the bathroom. If it is to be changed, it should be determined according to the specific conditions. If the model of the washing machine is different, the position of the water and the water will be different, so the waterway does not move best.

Seven, put the installation of good sanitary ware

It is best to remember the distance between the water holes before the decoration, and select the sanitary wares such as bathtubs, bath rooms, toilets, wash basins, etc. according to the size, so as not to be unsuitable in the decoration; the installation of the toilet should be sealed first with the toilet mud. It is then fixed with metal expansion screws or glass glue, so that it is easy to repair and leave space when the toilet is blocked.

Eight, emphasize ventilation and ventilation

There must be an exhaust fan in the bathroom, and the exhaust fan must have a retrograde gate to prevent backflow of dirty air, non-gas backflow, etc.

9. Reserve greening embellishments

To add a little anger, the bathroom should not be a corner forgotten by the green. In this way, during the decoration, some pots that are resistant to yin, wet, and damp can be placed in the bathroom, which makes the bathroom even more angry.

Global hardware network

Concerned about surprises

Label: nine precautions for bathroom decoration

Previous: Springs widely used spring machine came into being Next: What are the advantages and disadvantages of chrome plating

DUPLEX STAINLESS STEEL

Duplex Stainless Steels Available

Yuhong Group supplies LDX2101, 2205, Ferralium 255, Zeron 100 and LDX2507 in the form of plate, sheet, strip, bar, pipe, tubing, pipe fittings, flanges and weld wire.


Duplex Stainless Steel Overview

Duplex Stainless Steels, also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite. These steels have a duplex microstructure which contributes to their high strength and high resistance to stress corrosion cracking. Due to their high content of chromium, nitrogen and molybdenum, duplex steels offer good resistance to local and uniform corrosion. Duplex stainless steels have good weldability.


Today, modern duplex stainless steels can be divided into three groups:
Lean Duplex such as LDX2101
Standard Duplex such as 2205, the work-horse grade accounting for more than 80% of duplex usage
Super Duplex such as Ferralium 255 and Zeron 100 and LDX2507

Of the duplex grades, duplex 2205 is the most widely used. However, the super duplex steels like Zeron® 100 and LDX2507 are excellent for servicing severe corrosive environments, such as offshore and marine applications. Lean duplex 2101 is available as an economic alternative to 300 series stainless steels.


What are the Characteristics of Duplex Stainless Steels ?
Very good resistance to uniform corrosion
Very good resistance to pitting and crevice corrosion
High resistance to stress corrosion cracking and corrosion fatigue
High mechanical strength
Good sulfide stress corrosion resistance
Good abrasion and erosion resistance
Good fatigue resistance high energy absorption
Low thermal expansion
Good weldability


In what Applications are Duplex Stainless Steels® used ?
Oil and gas equipment
Offshore technology
Seawater desalination plants
Chemical industry, especially when handling chlorides
Flue-gas cleaning
Desalination plants and seawater systems
Pulp and paper industry
Cargo tanks and pipe systems in chemical tankers
Firewalls and blast walls on offshore platforms
Bridges
Storage tanks
Pressure vessels, reactor tanks, and heat exchangers
Rotors, impellers and shafts

Duplex Steel Fitting

Duplex Steel Fitting,Duplex Steel Pipe Fitting,Duplex Stainless Steel Fitting

YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com